The Schneider Electric LC1E80008N7IN is a 4-pole (4NO) contactor from the Easy TeSys Control range, rated for AC-1 utilisation category at 110 A up to 415 V. AC-1 covers resistive loads — heaters, lighting banks, non-inductive circuits — so this contactor is sized for switching those loads, not motor starting. The 4-pole configuration gives you four normally-open main contacts in one package. Altitude rating is 3000 m. The contactor complies with EN/IEC 60947-1, 60947-4-1, and 60947-5-1, plus the Chinese GB/T equivalents.
If you need a current-production alternative, the closest functional match would be a similar Easy TeSys or TeSys Deca contactor with the same pole count and AC-1 rating — but pinout, dimensions, and auxiliary contact arrangement must be verified against your existing panel layout.
Dimensions are 95 mm wide, 127 mm high, and 120 mm deep. That depth is the front-to-back dimension when mounted on the DIN rail — important for enclosure depth clearance, especially in shallow gland-plate or back-panel layouts. The 95 mm width occupies roughly 5.4 modules of 17.5 mm DIN-rail space. Mechanical robustness is specified for vibration (1.5 Gn open, 3 Gn closed at 5-300 Hz) and shock (6 Gn open, 7 Gn closed at 11 ms). These figures matter for applications on mobile equipment or near heavy machinery that transmits vibration through the panel floor.