The Schneider Electric LC1E80008V7IN is a 4-pole (2NO+2NC) contactor from the Easy TeSys Control range, rated for AC-1 resistive loads up to 110 A at ≤415 V with a 400 V coil.
The AC-1 utilisation category means this contactor is rated for switching resistive loads (little to no inrush), so it's a natural fit for heater banks, lighting contactor duty, or other non-inductive circuits. The 4-pole configuration with 2NO+2NC gives flexibility for controlling two independent circuits or one three-phase load plus a neutral. The IP2X finger protection on the contactor body means it's safe for open-panel mounting where accidental touch is a concern, though it's not rated for washdown environments.
The protective treatment (TH) per IEC 60068 means it's suitable for tropical environments with high humidity and pollution degree 3 conditions — typical in unheated industrial enclosures.