The LC1E80M5 is a 3-pole contactor from Schneider Electric's Easy TeSys Control range, rated 80 A in AC-3 and AC-3e utilisation categories at ≤440 V. The 220 V AC 50 Hz coil pulls in cleanly on a standard control transformer, and the 1.5 ms guaranteed non-overlap time between NC and NO contacts means you won't get a cross-conduction glitch during coil energisation or de-energisation.
Mounts on either a DIN rail or a plate, so it slots into a standard control panel without a special adapter. Dimensions are 85 mm wide by 127 mm tall by 121 mm deep — that's a compact footprint for an 80 A motor-rated contactor. The IP2X finger-safe degree of protection means it's fine inside an enclosed panel; you don't need to add terminal shrouds for basic touch protection.
Certified to EN/IEC 60947-4-1 (the main contactor standard for motor starting) and EN/IEC 60947-5-1 for control-circuit switching, plus the GB/T equivalents. That means it's accepted across European and Chinese markets without a separate approval run. Fire resistance tested to 850 °C glow-wire per IEC 60695-2-1, and the TH protective treatment (pollution degree 3) handles the condensation and humidity you'd see in an unheated panel room.