The Schneider Electric LC1E80R6 is a three-pole contactor from the Easy TeSys Control range, rated 80 A in AC-3 and AC-3e utilisation categories at ≤440 V, with a 440 V AC 60 Hz coil. The contactor is certified to EN/IEC 60947-1, 60947-4-1, and 60947-5-1, plus GB/T equivalents, and passes a 850 °C glow-wire test per IEC 60695-2-1 for fire resistance.
For a replacement, you will need to evaluate a parametric cross-reference based on your specific load and coil voltage — the Easy TeSys Control family has current-production siblings, but pin-compatibility and footprint should be verified against the panel layout.
The 80 A AC-3 rating governs motor switching — that is the current the contactor can make and break across a typical induction motor load. The AC-3e category adds an energy-saving classification for motors with electronic controllers. The AC-1 rating covers resistive loads at a higher continuous current, but the exact AC-1 value is not listed here. The 440 V AC coil means this contactor is designed for a 440 V control circuit at 60 Hz. If your control voltage is different, the coil must be swapped or a different variant selected. Operating altitude is 3000 m without derating, and the permissible ambient temperature range is -5 to 55 °C for operation, with storage from -60 to 80 °C.