The LC1E95U5 is a 3-pole contactor from Schneider Electric's Easy TeSys Control range, rated for 95 A in AC-3 and AC-3e duty at up to 440 V. The 240 V AC 50 Hz coil pulls in the main power contacts for motor starting or resistive load switching. Rated operational voltage for the power circuit is given, and the control circuit is isolated at 10 MOhm. The contactor carries approvals to EN/IEC 60947-1, 60947-4-1, and 60947-5-1, plus the Chinese GB/T equivalents — so it's accepted in both European and Asian panel builds.
The 95 A AC-3 rating is the motor-switching current at 440 V — that's the figure that determines whether this contactor handles your induction motor load under starting and running conditions. AC-3e is the energy-saving variant for electronically controlled motors. For resistive loads (AC-1), the contactor can carry higher current, but the AC-3 number is the one to match against your motor FLA. Operating temperature range is -20 to 70 °C at the coil, with storage down to -60 °C and operation from -5 to 55 °C. Altitude rating of 3000 m without derating means it's fine for most installations; above that, air density drops and you'd need to reduce the rated current or consult the thermal derating curve. Mechanical robustness is specified at 1.5 Gn vibration (contacts open) and 3 Gn (closed), with shock ratings of 6 Gn and 7 Gn respectively. That's typical for industrial panel mounting — not mil-spec, but enough for a conveyor line or pump skid.
The 85 mm width and 127 mm height fit a standard contactor footprint — plan for the 121 mm depth when routing wiring behind the panel door or against a gland plate.
That's the documentation package a quality doc control team needs for panel certification in European or Chinese markets.