The Schneider LC1F1154G622L is a TeSys F series 4-pole contactor rated for 200 A in AC-1 duty (resistive loads) at ≤440 V, 40 °C ambient. The 120 V AC 60 Hz coil draws 660 VA inrush and 55 VA hold-in. It is designed for panel-mount on a plate, with power circuit bolted connections accepting up to 95 mm² cable.
The 200 A AC-1 rating governs resistive loads like heaters or lighting banks. For motor duty (AC-3), this contactor carries UL/CSA horsepower ratings of 30 hp at 200 V, 40 hp at 230 V, 75 hp at 460 V, and 100 hp at 575 V — these are the numbers that decide if it fits a given motor branch circuit. Rated breaking capacity is 920 A per IEC 60947-4-1, and the mechanical durability is 10 million cycles. The contactor withstands vibration up to 6 Gn closed and shocks up to 15 Gn closed, which matters for installations on mobile equipment or near heavy machinery. Operating temperature range is -40 to 140 °F (-40 to 60 °C) with no derating up to 3000 m altitude. The IP2X front face with shrouds provides basic finger protection inside the enclosure.
Designed to IEC 60947-4-1, EN 60947-1, EN 60947-4-1, JIS C8201-4-1, and IEC 60947-1. Rated insulation voltage is 1000 V per IEC 60947-4-1 and 1500 V per VDE 0110 group C. Overvoltage category III. Protective treatment TH for tropical environments.
Mounts on a plate (not DIN rail). Dimensions: 7.9 in wide, 10.4 in high, 6.7 in deep. Power circuit uses bolted connections with ring terminals or bars; control circuit uses screw clamp terminals accepting 1–4 mm² solid or stranded. Tightening torque: 88.5 lbf·in (10 N·m) for power, 10.6 lbf·in (1.2 N·m) for control.