Skip to main content
Schneider Electric LC1F2100GD — Contactors

Schneider Electric LC1F2100GD TeSys F Contactor, 2100 A AC-1

MPNLC1F2100GD
Obsolete

Schneider Electric TeSys F series, LC1F2100GD, 3-pole contactor, 2100 A AC-1, 125 V DC coil, plate mount.

StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

Identification

LC1F2100GD — Identification
ParameterValue
Product / component typeContactor
Series / rangeTeSys
ApplicationResistive load

Ratings & Performance

LC1F2100GD — Ratings & Performance
ParameterValue
Rated operational voltage (Ue)<= 460 V DC
Utilisation categoryAC-1

Contacts & Poles

LC1F2100GD — Contacts & Poles
ParameterValue
Pole configuration3P

Environmental

LC1F2100GD — Environmental
ParameterValue
Operating altitude3000 m without derating
Protective treatment / pollution degreeTH

Approvals

LC1F2100GD — Approvals
ParameterValue
StandardsIEC 60947-1 JIS C8201-4-1 EN 60947-1 EN 60947-4-1 IEC 60947-4-1 UL 60947-4-1 CSA C22.2 No 60947-4-1

Mechanical

LC1F2100GD — Mechanical
ParameterValue
Width438 mm
Height332 mm
Depth238.6 mm

Product details

The 125 V DC control coil pulls in at 0.85 to 1.1 times nominal and drops out between 0.2 and 0.35 times nominal at 55 °C, so a saggy 125 V DC bus won't cause nuisance dropouts until it falls below about 25 V. Rated operational voltage goes up to 460 V DC, and the rated insulation voltage is 1000 V per IEC 60947-4-1 (1500 V per VDE 0110 group C).

Above that, the operating range tops out at 55 °C, so you'll need to account for panel internal temperature rise. The rated short-time withstand current (Icw) is 10,000 A for 10 seconds, 7,500 A for 30 seconds, and 5,500 A for 1 minute — these numbers govern coordination with upstream protective devices: a 2,000 A gG fuse at ≤440 V is the recommended backup. Power dissipation is 200 W per pole in AC-1 duty, totalling 600 W across the three poles at full load — that's the heat you have to vent from the enclosure. The coil itself dissipates 10 W holding in, with an inrush of 2,100 W at 20 °C during pickup. Average impedance per pole is 0.1 mOhm at 2,100 A, 50 Hz. Operating time is 50 to 60 ms closing and 45 to 60 ms opening — fast enough for most resistive load switching but not for synchronous transfer or fast bus-tie applications. Maximum operating rate is 600 cycles per hour at 55 °C.

This is a plate-mount contactor — no DIN rail clip. The footprint is 438 mm wide by 332 mm high by 238.6 mm deep, so it needs a backplate or sub-panel, not a standard 35 mm rail. Power connections are bolted bars accepting up to four cables or busbars 100 x 5 mm cross-section. Control circuit terminals are screw-clamp, accepting 1 to 4 mm² flexible or solid wire (with or without ferrules). Tightening torque is 1.2 N·m on the control circuit and 58 N·m on the power circuit — that's substantial; use a torque wrench on the power lugs.

Certified to IEC 60947-1, IEC 60947-4-1, EN 60947-1, EN 60947-4-1, UL 60947-4-1, CSA C22.2 No. 60947-4-1, and JIS C8201-4-1. Overvoltage category III, rated impulse withstand voltage 8 kV. Protective treatment is TH (tropicalised) for humid environments. Operating altitude up to 3,000 m without derating. Storage temperature range -60 to 80 °C.

Frequently asked questions

Where can I buy LC1F2100GD and get a price?

We can source and quote the LC1F2100GD to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — submit an RFQ for a firm price and lead time.

What is the closest alternative to LC1F2100GD in the TeSys family?

There is no direct drop-in replacement from the TeSys F series, as the LC1F2100GD is end-of-life. For a new design, look at the current TeSys range for a contactor with similar 2100 A AC-1 rating and 125 V DC coil — expect different footprint and mounting, so panel layout verification is required.

What compliance documentation does Schneider provide for LC1F2100GD?

The LC1F2100GD carries certifications to IEC 60947-1, IEC 60947-4-1, EN 60947-1, EN 60947-4-1, UL 60947-4-1, CSA C22.2 No. 60947-4-1, and JIS C8201-4-1. Standard documentation includes the datasheet and declaration of conformity per these standards.

MPN
LC1F2100GD