The Schneider Electric LC1F2100N7 is a TeSys F 3-pole contactor rated for 2100 A in AC-1 utilisation category (resistive load) at 40 °C. That AC-1 rating means it handles resistive heating loads — ovens, furnaces, lighting banks — at full continuous current, not motor starting. The control coil is 415 V AC, 40-400 Hz, with a hold-in draw of 36 VA and inrush of 2200 VA. Operating time is 100-170 ms opening, 40-75 ms closing.
The LC1F2100N7 carries approvals to EN 60947-4-1, IEC 60947-4-1, UL 60947-4-1, CSA C22.2 No 60947-4-1, and JIS C8201-4-1. Rated insulation voltage is 1000 V per IEC/UL, 1500 V per VDE 0110 Group C. Impulse withstand voltage is 8 kV. Overvoltage category III. Protective treatment TH for tropical environments.
Plate-mounted — no DIN rail. Dimensions: 438 mm wide, 332 mm high, 238.6 mm deep. Power circuit connections use bolted bars with busbar cross-section up to 100 x 5 mm. Control circuit uses screw-clamp terminals accepting 1-4 mm² flexible or solid. Tightening torque: power circuit 58 N·m, control circuit 1.2 N·m. Heat dissipation is 36 W total, 200 W per pole in AC-1 duty.