The Schneider Electric LC1F2600N7 is a TeSys F 3-pole contactor rated for 2600 A in AC-1 duty (resistive loads) at up to 1000 V AC 50/60 Hz. The 415 V AC control coil draws 2500 VA inrush, 45 VA hold. This is a plate-mount part — no DIN-rail clip — sized for bolted busbar connections in a panel or enclosure.
The 2600 A AC-1 rating governs resistive loads (heaters, lighting, non-inductive banks). For motor duty (AC-3), the contactor would derate significantly — the evidence does not list an AC-3 figure, so size up if driving induction motors. The 415 V AC coil is not universal: it operates on 40–400 Hz, with pickup at 0.85–1.1 Uc and dropout at 0.3–0.5 Uc. The plate-mount form factor and bar-type power terminals (accepting up to 100 x 10 mm busbar) mean it integrates into a switchboard or large panel, not a small enclosure.
Standards & Approvals
Certified to IEC 60947-4-1, EN 60947-4-1, UL 60947-4-1, CSA C22.2 No 60947-4-1, and JIS C8201-4-1. Rated insulation voltage 1000 V, impulse withstand 8 kV. IP20 front face with shrouds per IEC 60529 and VDE 0106. Protective treatment TH for tropical environments. Operating temperature range -5 to 40 °C; storage -60 to 80 °C.