The LC1F63097Q7 is a TeSys F three-pole contactor rated for 630 A in AC-1 utilisation category at up to 480 V. AC-1 means the rating covers resistive loads — heaters, lighting banks, or transformer primaries — not motor starting. For motor duty you would look at the AC-3 rating on a different variant; this one is built for continuous current, not the inrush of an induction motor. The power pole configuration is 3 NO (normally open), so it makes three circuits when the coil pulls in. The coil is wound for 380 V AC. The contactor carries a full set of IEC 60947-4-1 and EN 60947-4-1 standards, which is what you need for a panel built to European or JIS (JIS C8201-4-1) specifications.
The contactor measures 12.2 in wide by 12.0 in tall by 10.04 in deep. That is a substantial frame — it bolts into a panel, not a DIN rail. The depth of 255 mm means you need clearance behind the panel door for the arc chamber and coil terminals. Verify the cutout and drill pattern against the mounting template before committing the panel layout.