The Schneider Electric TeSys LC1K06016FLS207 is a 3-pole contactor with a 1.8 W coil that includes an integral suppression device, rated for motor control in AC-3, AC-3e, and AC-4 utilization categories. It carries one normally closed (1 NC) instantaneous auxiliary contact alongside the three NO main power poles, which is typical for a holding-circuit interlock or status feedback.
Rated for AC-3 and AC-4 duty per IEC 60947-4-1, this contactor is sized for switching motor loads under both normal running (AC-3) and inching/plugging (AC-4) conditions — a distinction that matters when the application includes frequent jogging or reversing. The 1.8 W inrush and hold-in power at 20 °C means the coil driver sees a modest load, and the integral suppression device handles the back-EMF spike, so no external flyback diode or RC snubber is needed across the coil terminals. Electrical durability is listed at 1.3 million cycles at 6 A AC-3 up to 440 V, with mechanical durability at 30 million cycles — the electrical figure is the limiting factor for motor-load life, while the mechanical figure governs auxiliary-signal or low-current use.
Power-circuit connections use lugs or ring terminals with a tightening torque of 0.8 to 1.3 N·m, compatible with a 3.2 mm flat, Philips No 2, or Pozidriv No 2 screwdriver. The 57 mm depth and 58 mm height should be checked against enclosure depth limits, especially when mounted with an overload relay or auxiliary block alongside.
Certified to EN/IEC 60947-4-1, UL 60947-4-1, CSA C22.2 No 60947-4-1, GB/T 14048.4, and JIS C8201-4-1, covering the major global markets for motor-contactor applications. Flame retardance is V0 per UL 94, and the protective treatment conforms to IEC 60068 and DIN 50016 for corrosion resistance.