Skip to main content
Log in
Schneider Electric LC1K06016R7 — Contactors

Schneider LC1K06016R7 TeSys K Contactor, 6 A, 440 V AC Coil,

MPNLC1K06016R7
Obsolete

Schneider Electric TeSys K contactor, 3P, AC-3 ≤440 V 6 A, 1 NC aux, 440 V AC coil, obsolete.

Schneider Electric LC1K06016R7 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LC1K06016R7 — Identification
ParameterValue
Product / component typeContactor
Series / rangeTeSys
LC1K06016R7 — Ratings & Performance
ParameterValue
Utilisation categoryAC-4 AC-3
LC1K06016R7 — Contacts & Poles
ParameterValue
Pole configuration3P
LC1K06016R7 — Environmental
ParameterValue
Flame retardanceV1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102
LC1K06016R7 — Mechanical
ParameterValue
Width45 mm
Height58 mm
Depth57 mm

Product details

Its 6 A rated operational current at ≤440 V AC handles small motor loads: 1.5 kW at 220–230 V, 2.2 kW at 380–415 V, and 3 kW across the 440 V to 690 V range. The 440 V AC coil pulls in on that voltage, and the built-in 1 NC auxiliary contact gives you a feedback or interlock path without adding a separate block.

The 3-pole, 3 NO contact arrangement leaves no normally-closed power poles; the single NC auxiliary is on the control side. Spring-cage or screw terminals depending on the variant; this order code carries the 440 V AC coil, so verify coil voltage matches your control transformer tap before landing wires.

Frequently asked questions

What is the closest alternative to LC1K06016R7?

No official successor order code is listed in the lifecycle record. A parametric cross-reference within the TeSys K family would need to match the 3-pole, 6 A AC-3 rating, 1 NC aux, and 440 V AC coil. Without a published replacement, sourcing runs through the surplus channel.

What are the motor power ratings for this contactor?

Rated motor power is 1.5 kW at 220–230 V AC, 2.2 kW at 380–415 V AC, and 3 kW at 440 V, 480 V, 500–600 V, and 660–690 V AC, all at 50/60 Hz.

What compliance documentation does this part carry?

The contactor carries a V1 flame retardance rating per UL 94, and also meets NF F 16-101 and NF F 16-102 requirements for fire behaviour. The TeSys K range typically holds CE, CSA, and UL marks, though specific certification listings for this exact order code should be verified against the original Schneider documentation.

MPN
LC1K06016R7