Skip to main content
Log in
Schneider Electric LC1K06105D7 — Contactors

TeSys K LC1K06105D7 Contactor, 3P, 6 A AC-3, 42 V Coil

MPNLC1K06105D7
Obsolete

Schneider Electric TeSys K contactor, LC1K06105D7, 3-pole, AC-3 ≤440 V 6 A, 1 N/O auxiliary, 42 V AC 50/60 Hz coil.

Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

LC1K06105D7 — Identification
ParameterValue
Product / component typeContactor
Series / rangeTeSys
LC1K06105D7 — Ratings & Performance
ParameterValue
Utilisation categoryAC-4 AC-3
LC1K06105D7 — Contacts & Poles
ParameterValue
Pole configuration3P
LC1K06105D7 — Environmental
ParameterValue
Flame retardanceV1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102
LC1K06105D7 — Mechanical
ParameterValue
Width45 mm
Height58 mm
Depth57 mm
LC1K06105D7 — Other specifications
ParameterValue
Motor power1.5 kW at 220...230 V AC 50/60 Hz 2.2 kW at 380...415 V AC 50/60 Hz 3 kW at 440 V AC 50/60 Hz 3 kW at 480 V AC 50/60 Hz 3 kW at 500...600 V AC 50/60 Hz 3 kW at 660...690 V AC 50/60 Hz
Heat dissipation1.3 W
Range of productTeSys K
Device short nameLC1K
Compatibility codeLC1K
Device applicationControl
Pole contact composition3 NO
[Ie] rated operational current6 A at 10 MOhm for signalling circuit
[Icw] rated short-time withstand current90 A 50 °C - 1 s for power circuit 85 A 50 °C - 5 s for power circuit 80 A 50 °C - 10 s for power circuit 60 A 50 °C - 30 s for power circuit 45 A 50 °C - 1 min for power circuit 40 A 50 °C - 3 min for power circuit 20 A 50 °C - >= 15 min for power circuit 80 A - 1 s for signalling circuit 90 A - 500 ms for signalling circuit 110 A - 100 ms for signalling circuit

Product details

The LC1K06105D7 is a TeSys K contactor from Schneider Electric, 3-pole, rated 6 A in AC-3 utilization category at ≤440 V, with a 42 V AC 50/60 Hz coil. It carries one normally open auxiliary contact. The AC-3 rating means it is suited for switching squirrel-cage motors — the 6 A figure governs the motor full-load current it can handle, not resistive heating.

Motor power coverage

Across common supply voltages the contactor covers motor loads from 1.5 kW at 220–230 V AC up to 3 kW at 480 V and 660–690 V AC. At 380–415 V it handles 2.2 kW. This makes it a fit for small pumps, fans, and conveyors in a 400 V class panel.

Integration notes

TeSys K LR2K series). The 42 V AC coil is typical for control transformers in older or retrofit panels; verify the control voltage matches the existing transformer tap before wiring.

Frequently asked questions

What is the closest alternative to the LC1K06105D7 in the TeSys K family?

Within the TeSys K range, the closest sibling is the LC1K0610 series with the same 6 A AC-3 rating and 3-pole configuration but a different coil voltage. The LC1K06105D7 uses a 42 V AC coil; if your control voltage differs, select the variant with the matching coil (e.g., 24 V AC, 110 V AC, 230 V AC). The mechanical footprint and auxiliary contact arrangement are identical across the LC1K0610 family.

What compliance documentation does Schneider Electric provide for the LC1K06105D7?

The contactor carries UL 94 V-1 flame retardance certification. For RoHS, REACH, and IEC compliance declarations, Schneider Electric publishes a product environmental profile and a declaration of conformity for the TeSys K series. These documents are available through the standard documentation portal using the product order code.

MPN
LC1K06105D7