Schneider Electric TeSys K contactor, LC1K09016Q7, 3-pole, AC-3 ≤ 440 V 9 A, 1 NC auxiliary, 380…400 V AC coil.
| Parameter | Value |
|---|---|
| Product / component type | Contactor |
| Series / range | TeSys |
| Parameter | Value |
|---|---|
| Utilisation category | AC-1 |
| Parameter | Value |
|---|---|
| Pole configuration | 3P |
| Parameter | Value |
|---|---|
| Flame retardance | V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102 |
| Parameter | Value |
|---|---|
| Width | 45 mm |
| Height | 58 mm |
| Depth | 57 mm |
| Parameter | Value |
|---|---|
| Range of product | TeSys K |
| Device short name | LC1K |
| Device application | Control |
| Pole contact composition | 3 NO |
| Signalling circuit frequency | 10 MOhm for signalling circuit |
| Coil voltage | type instantaneous 1 NC |
No direct factory lead time applies. A parametric cross-reference within the TeSys K or TeSys D families should be evaluated based on panel footprint, coil voltage, and auxiliary stack requirements.
Snap-on mounting to DIN rail is standard for the TeSys K form factor; allow clearance above and below for coil-terminal access and wiring ducts.
No official successor order code is listed. A replacement within the TeSys K or TeSys D range should be selected by matching pole count, AC-3 current rating, coil voltage, and auxiliary contact configuration.
The listed depth is 57 mm.
It is rated V1 per UL 94, and also complies with NF F 16-101 and NF F 16-102 for railway and fire-safety applications.
The coil is rated 380…400 V AC.
No related articles