The LC3D80FE7A64 is a pre-wired star-delta starter from the TeSys D range, built for motor control in AC-3 duty. It carries three power poles, each 3 NO, rated at 80 A, with a 115 V AC coil. The front face is IP2X per IEC 60529, meaning it resists finger ingress but isn't sealed against dust or water — fine for a dry cabinet, not for washdown.
What the ratings mean for fit
AC-3 utilisation category covers starting and switching off squirrel-cage motors while running. The 80 A rating applies under AC-3. The 115 V AC coil requires a 115 V supply. Operating temperature spans -40 to 60 °C, with derating up to 70 °C.
Compliance and mechanicals
Fire resistance is tested to 850 °C per IEC 60695-2-1, and the plastic rates V1 on the UL 94 flame test — it won't propagate a flame. Pollution degree 3 means it's suited for industrial environments with conductive dust or occasional condensation. Storage temperature range is -60 to 80 °C. Vibration and shock ratings are given for both open and closed contactor states: 2 Gn vibration open, 3 Gn closed; 8 Gn shock open, 10 Gn closed. That's typical for a panel-mounted device on a machine skid, not for direct engine-mount.