The Schneider Electric LP1D40004ND is a 4-pole contactor from the TeSys Deca series, rated for 60 A in AC-1 utilisation category at 440 V, with a 60 VDC coil. The AC-1 rating means it is specified for resistive loads — heaters, lighting banks, or other non-inductive circuits — where the current inrush is minimal and the switching duty is steady-state. For motor loads, the AC-3 and AC-4 categories also listed on the device cover full-voltage starting and plugging/inching respectively.
Mounts on a rail or plate per the mounting support spec. The IP2X finger protection (IEC 60529, VDE 0106) means the contactor is safe for open-panel installation where accidental contact is a concern, but not sealed against dust or moisture.
What the standards tell you
The contactor carries compliance with JEM 1038, EN 60947-1, VDE 0660, BS 5424, IEC 60947-1, EN 60947-4-1, NF C 63-110, and IEC 60947-4-1 — that covers the main global switching-device standards for industrial control gear. The IEC 60947-4-1 standard specifically governs contactors and motor-starters, so this part is accepted in panels destined for Europe, the UK, and markets that adopt IEC norms. Fire resistance at 850 °C (IEC 60695-2-1) and V-1 flame retardance (UL 94) on the housing materials mean it meets the flammability requirements for most industrial enclosures.