The Schneider Electric LP1D40008JW is a TeSys D series contactor with four poles arranged as 2 normally-open and 2 normally-closed contacts, rated for resistive loads at AC-1 60 A at 440 V, with a 12 V DC coil. It is designed for switching resistive loads in control panels, with a rated operational voltage covering power circuit applications and a mechanical robustness that withstands shocks up to 10 Gn when open and 15 Gn when closed, plus vibrations up to 4 Gn across 5-300 Hz when closed. The contactor meets multiple international standards including IEC 60947-4-1, EN 60947-4-1, VDE 0660, and BS 5424, with a fire resistance rating of 850 °C per IEC 60695-2-1 and a V1 flame retardance per UL 94.
For procurement, this means the part is sourced through surplus or broker channels against an RFQ — no standard factory lead time applies. No official successor order code is provided in the lifecycle record, so a parametric cross-reference to a current TeSys D variant would need to be evaluated based on the specific application requirements (4-pole, 2NO+2NC, AC-1 60A, 12VDC coil).
The 12 V DC coil is a low-voltage control circuit — common in PLC-driven panels or battery-backed systems, but verify your control voltage matches exactly since DC coils are polarity-sensitive and have different pull-in characteristics than AC coils. Mounting is on plate or rail (DIN rail compatible), with dimensions of 85 mm width, 127 mm height, and 182 mm depth — fits standard TeSys D panel footprints. The contactor operates from -40 to 60 °C without derating, and up to 70 °C with derating, with storage from -60 to 80 °C — suitable for most industrial environments including unheated enclosures. It is rated for operation up to 3000 m altitude without derating, and carries IP2X finger protection per IEC 60529 and VDE 0106.