The Schneider Electric LP1D65004SW is a 4-pole contactor from the TeSys Deca range, rated for AC-1 resistive loads at 80 A at 440 V, with a 72 V DC coil. It's built for switching power circuits in industrial control panels — motor starters, heater banks, lighting distribution — where you need four independently switched poles in one frame. The AC-1 rating of 80 A at 440 V governs resistive loads (heaters, lighting); for motor duty (AC-3), the rated current will be lower — the utilisation categories AC-1, AC-3, AC-3e, and AC-4 are all listed, so the part covers both resistive and inductive switching. The 72 V DC coil means it's intended for DC control circuits, common in battery-backed or PLC-driven panels where 24 VDC or 48 VDC is standard, though 72 VDC is less common — verify your control voltage matches before specifying. Mounts on a plate or DIN rail (mounting support listed as plate and rail), with dimensions 85 mm wide, 127 mm high, and 182 mm deep — fits standard enclosure backplates.
Because it's obsolete, the supply is finite and shrinking. If you're filling a long-term spares requirement or a line-down replacement, the smart move is to secure what's available now rather than waiting. We can source this part against an RFQ — we'll check our network of surplus and broker channels for available units. No guarantees on quantity or lead time until we quote, but this is the standard path for obsolete TeSys Deca contactors.
Certified to EN 60947-1, EN 60947-4-1, IEC 60947-4-1, BS 5424, VDE 0660, JEM 1038, and NF C 63-110 — covers the major European and international standards for contactors and motor-starters. Flame retardance is V1 per UL 94, and fire resistance is 850 °C per IEC 60695-2-1, so it's suitable for panel builds that require self-extinguishing materials.