The LP1D65008CD: AC-1 is the resistive-load rating — heating elements, lighting banks, non-inductive loads. The 4-pole arrangement with 2 normally-open and 2 normally-closed contacts gives flexibility for interlocking or dual-circuit switching in a single device. Coil is 36 V DC — verify your control voltage matches; the pickup/dropout thresholds (not listed here) typically hold at 0.8–1.1x nominal for DC coils.
Mounts on plate or DIN rail. Dimensions: 85 mm wide, 127 mm high, 182 mm deep — fits standard 4-pole contactor footprint. Rated for operation up to 3000 m altitude without derating, and ambient temperature from -40 to 60 °C (derate above 60 °C).
Meets EN 60947-1, IEC 60947-1, VDE 0660, BS 5424, JEM 1038, EN 60947-4-1, NF C 63-110, IEC 60947-4-1. Climatic withstand per IACS damp heat exposure. These standards cover the contactor for most European and Asian panel builds; UL listing isn't stated on this variant — check if your project requires CSA/UL mark.
Sourcing reality
Active lifecycle — no end-of-life notification. This is a standard catalog line from the TeSys D family; supply runs through normal distribution. No direct cross-reference to a different manufacturer's part; the TeSys D range is Schneider's own platform.