The LP1K09013ED is a TeSys K three-pole contactor from Schneider Electric, rated 9 A in AC-3 utilisation category at up to 440 V, with a 48 V DC coil and one normally closed auxiliary contact. AC-3 is the standard duty for starting and stopping squirrel-cage motors under load — so the 9 A rating governs motor switching up to roughly 4 kW at 400 V three-phase. The contactor also carries AC-1 (resistive) and AC-4 (plugging/inching) ratings, meaning it handles resistive heater loads and occasional reversing duty, though AC-4 current is typically lower than AC-3.
TeSys K LP1K09013ED Contactor, 9A AC-3, 48V DC Coil
MPNLP1K09013ED
Active
Schneider Electric TeSys K contactor, 3P, AC-3 ≤440V, 9A, 1 NC aux, 48V DC coil, depth 57 mm.
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026
Specifications
| Parameter | Value |
|---|---|
| Product / component type | Contactor |
| Series / range | TeSys |
| Parameter | Value |
|---|---|
| Utilisation category | AC-1 AC-4 AC-3 |
| Parameter | Value |
|---|---|
| Pole configuration | 3P |
| Parameter | Value |
|---|---|
| Flame retardance | V1 UL 94 Requirement 2 NF F 16-101 Requirement 2 NF F 16-102 |
| Parameter | Value |
|---|---|
| Width | 1.8 in (45 mm) |
| Height | 2.3 in (58 mm) |
| Depth | 2.2 in (57 mm) |
| Parameter | Value |
|---|---|
| Range of product | TeSys K |
| Device short name | LP1K |
| Inrush power in | 3 W 68 °F (20 °C)) |
| Compatibility code | LP1K |
| Pole contact composition | 3 NO |
| Hold-in power consumption in | 3 W 68 °F (20 °C) |
| [Ie] rated operational current | 20 A (at 9 A at 16 A (at 10 MOhm for signalling circuit |
Product details
Frequently asked questions
What is the closest alternative within the TeSys K family?
The LP1K09013ED is a specific variant with a 48 V DC coil and one NC auxiliary. Other TeSys K contactors share the same frame size and pole configuration but differ in coil voltage or auxiliary contact count. Pin compatibility depends on the coil voltage matching your control circuit; the mechanical footprint and DIN-rail clip are identical across the K range.
What is the depth of the LP1K09013ED?
The depth is listed as 2.2 in (57 mm).
What compliance documentation is available for this contactor?
The part carries V1 flame retardance per UL 94 and meets NF F 16-101 and NF F 16-102 railway fire standards. For full compliance documentation (RoHS, REACH, UL listing, IEC ratings), refer to the manufacturer's product certification sheet available through the brand portal.
MPN
LP1K09013ED