The LP1K0901JD3 is a TeSys K three-pole contactor, rated 9 A in AC-3 duty at up to 440 V, with a 12 V DC coil and one normally-closed auxiliary contact. The built-in bidirectional peak limiting diode suppressor on the coil eliminates the need for an external flyback diode or RC snubber across the coil terminals.
TeSys K LP1K0901JD3 Contactor, 9A AC-3, 12V DC Coil, Obsolet
MPNLP1K0901JD3
Obsolete
Schneider Electric TeSys K contactor, 3P, AC-3 ≤440V 9A, 1 NC auxiliary, 12V DC coil, built-in bidirectional peak limiting diode suppressor.
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026
Specifications
| Parameter | Value |
|---|---|
| Product / component type | Contactor |
| Series / range | TeSys |
| Parameter | Value |
|---|---|
| Utilisation category | AC-1 AC-3 AC-4 |
| Parameter | Value |
|---|---|
| Pole configuration | 3P |
| Parameter | Value |
|---|---|
| Flame retardance | V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102 |
| Parameter | Value |
|---|---|
| Width | 45 mm |
| Height | 58 mm |
| Depth | 57 mm |
| Parameter | Value |
|---|---|
| Coil technology | Built-in bidirectional peak limiting diode suppressor |
| Range of product | TeSys K |
| Device short name | LP1K |
| Inrush power in | 3 W (at 20 °C) |
| Compatibility code | LP1K |
| Pole contact composition | 3 NO |
| Hold-in power consumption in | 3 W at 20 °C |
| [Ie] rated operational current | 20 A (at 9 A at 16 A (at 10 MOhm for signalling circuit |
Product details
Frequently asked questions
What is the closest alternative to the LP1K0901JD3 in the TeSys K family?
There is no official direct successor listed for this order code. A functionally similar current-production TeSys K contactor with the same coil voltage and pole configuration would need to be selected from the active TeSys K range, but pin-compatibility and mounting footprint should be verified against the specific BOM requirement.
What compliance documentation is available for this part?
The part carries a V1 flame retardance rating per UL 94 and also meets NF F 16-101 and NF F 16-102 requirements. Standard Schneider Electric compliance documentation (RoHS, REACH, CE) would have applied at the time of manufacture; for obsolete parts, archived certificates may be available through the manufacturer's documentation portal.
MPN
LP1K0901JD3