Overview
It carries certification to EN/IEC 60947-4-1, UL 60947-4-1, CSA C22.2 No 60947-4-1, CCC, and EAC, and is rated IP2X for in-cabinet mounting on DIN rail or plate.
The contactor switches three power poles for resistive or motor loads up to 9 A in AC-3 duty. The 60 V DC coil draws 3 W steady-state and operates without a built-in suppressor; an external flyback diode or RC snubber must be added across the coil for DC switching. The single NC auxiliary provides status feedback or interlocking. Screw terminals accept 1.5–4 mm² solid or stranded wire; torque to 7.08 N·m.
Applications
TeSys K contactors of this size are used in motor starting, lighting, and resistive heating circuits inside control panels, packaging machinery, conveyors, and HVAC equipment where a compact 3-pole block is needed.
Compliance & certifications
The LP1K0901ND holds UL, CSA, CCC, EAC, and CE marks, with design verification to EN/IEC 60947-4-1 and EN/IEC 60947-5-1. Flammability rating V1 per UL 94.
The TeSys K series is an established Schneider line; the LP1K0901ND remains in active production. Electrical endurance is rated 1.3 million cycles at 9 A AC-3, mechanical life 10 million cycles.