Skip to main content
Log in
Schneider Electric LP2K1201MD — Contactors

Schneider LP2K1201MD TeSys K Reversing Contactor, 12A AC-3,

MPNLP2K1201MD
Obsolete

Schneider Electric TeSys K reversing contactor, 3P, AC-3 ≤440 V 12 A, 1 NC, 220 V DC coil, IP20.

Schneider Electric LP2K1201MD datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LP2K1201MD — Identification
ParameterValue
Product / component typeReversing contactor
Series / rangeTeSys
ApplicationMotor control Resistive load
LP2K1201MD — Ratings & Performance
ParameterValue
Rated operational voltage (Ue)Power circuit: 690 V AC 50/60 Hz Signalling circuit: 10 MOhm for signalling circuit
Utilisation categoryAC-3 AC-4 AC-1
LP2K1201MD — Contacts & Poles
ParameterValue
Pole configuration3P
LP2K1201MD — Environmental
ParameterValue
IP degree of protectionIP20 conforming to VDE 0106
Operating altitude2000 m without derating
Mechanical robustnessShocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 Shocks contactor opened, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on X axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27
Protective treatment / pollution degreeTC conforming to IEC 60068 TC conforming to DIN 50016
Flame retardanceV1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102
LP2K1201MD — Mechanical
ParameterValue
Width90 mm
Height58 mm
Depth57 mm

Product details

The IP20 finger-safe enclosure (per VDE 0106) suits it for enclosed panel mounting where personnel contact is possible.

The AC-3 rating of 12 A at ≤440 V governs motor switching. The 220 V DC coil is a specific control voltage; verify your control transformer or DC supply matches this. The 1 NC auxiliary contact provides a feedback or interlock signal. Mechanical robustness is certified to 15 Gn shock (closed) and 4 Gn vibration (closed) per IEC 60068-2-27 and -6, so it holds in on high-vibration machinery like conveyors or compressors.

Frequently asked questions

What are the key ratings for LP2K1201MD?

It is a 3-pole reversing contactor rated AC-3 at 12 A up to 440 V, with a 220 V DC coil and one NC auxiliary contact. The power circuit is rated for 690 V AC 50/60 Hz. IP20 protected.

What is the physical size of LP2K1201MD?

The dimensions are 90 mm wide, 58 mm high, and 57 mm deep.

MPN
LP2K1201MD