Skip to main content
Log in
Schneider Electric LP2K12013BD — Contactors

TeSys K LP2K12013BD reversing contactor, 3P, 20 A, 24 V DC c

MPNLP2K12013BD
Obsolete

Schneider Electric TeSys K reversing contactor LP2K12013BD, 3P, AC-3 ≤ 440 V 20 A, 1 NC, 24 V DC coil, obsolete status.

Schneider Electric LP2K12013BD datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LP2K12013BD — Identification
ParameterValue
Product / component typeReversing contactor
Series / rangeTeSys
ApplicationResistive load Motor control
LP2K12013BD — Ratings & Performance
ParameterValue
Rated operational voltage (Ue)Power circuit: 690 V AC 50/60 Hz Signalling circuit: 10 MOhm for signalling circuit
Utilisation categoryAC-1 AC-3 AC-4
LP2K12013BD — Contacts & Poles
ParameterValue
Pole configuration3P
LP2K12013BD — Environmental
ParameterValue
IP degree of protectionIP20 conforming to VDE 0106
Operating altitude2000 m without derating
Mechanical robustnessShocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 Shocks contactor opened, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on X axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27
Protective treatment / pollution degreeTC conforming to IEC 60068 TC conforming to DIN 50016
Flame retardanceV1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102
LP2K12013BD — Mechanical
ParameterValue
Width90 mm
Height58 mm
Depth57 mm

Product details

The LP2K12013BD is a TeSys K reversing contactor from Schneider Electric — a 3-pole device rated for 20 A in AC-3 duty at up to 440 V, with a 24 V DC coil and one NC auxiliary contact. It ships preassembled with the reversing power busbar, saving panel-build time on motor-reversing circuits for conveyors, hoists, or door actuators where forward/reverse control is needed.

The AC-1 rating covers resistive loads, and AC-4 covers plugging/inching duty, so the same block handles different load profiles. The 24 V DC coil is a common control voltage in industrial panels; pull-in and hold-in are designed for that nominal supply. IP20 finger-safe terminals (per VDE 0106) mean it can live on an open DIN-rail panel without additional shrouding.

Frequently asked questions

What are the key ratings for LP2K12013BD?

Three-pole reversing contactor rated AC-3 20 A at ≤ 440 V, with a 24 V DC coil and one NC auxiliary contact. It covers AC-1 and AC-4 utilization categories as well, and carries IP20 finger-safe protection.

How can I source this obsolete part?

Through independent surplus and distributor channels. Send an RFQ and we will quote availability and pricing — no stock or lead-time numbers in this listing.

MPN
LP2K12013BD