Skip to main content
Log in
Schneider Electric LP2K1210KD — Contactors

TeSys K LP2K1210KD Reversing Contactor, 12 A AC-3, 100 V DC

MPNLP2K1210KD
Active

Schneider Electric TeSys K reversing contactor, 3P, AC-3 <= 440 V 12 A, 1 NO, 100 V DC coil, IP20.

Schneider Electric LP2K1210KD datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LP2K1210KD — Identification
ParameterValue
Product / component typeReversing contactor
Series / rangeTeSys
ApplicationResistive load Motor control
LP2K1210KD — Ratings & Performance
ParameterValue
Rated operational voltage (Ue)Power circuit: 690 V AC 50/60 Hz Signalling circuit: 10 MOhm for signalling circuit
Utilisation categoryAC-3 AC-4 AC-1
LP2K1210KD — Contacts & Poles
ParameterValue
Pole configuration3P
LP2K1210KD — Environmental
ParameterValue
IP degree of protectionIP20 conforming to VDE 0106
Operating altitude2000 m without derating
Mechanical robustnessShocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 Shocks contactor opened, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on X axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27
Protective treatment / pollution degreeTC conforming to IEC 60068 TC conforming to DIN 50016
Flame retardanceV1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102
LP2K1210KD — Mechanical
ParameterValue
Width90 mm
Height58 mm
Depth57 mm

Product details

Rated 12 A in AC-3 duty at up to 440 V, it handles the full-voltage starting and stopping of a three-phase induction motor in that current class; the 100 V DC coil means it pulls in on a 100 VDC control signal, common in DC-switched panels or battery-backed control circuits. The single normally-open auxiliary contact gives you one feedback or interlock signal.

This is a panel-mount reversing contactor sized for DIN-rail or screw-mount installation inside an IP20 enclosure. The 57 mm depth and 90 mm width keep it compact for a reversing pair — the busbar is already integrated, so you save the space a separate reversing kit would eat. IP20 (VDE 0106) means finger-safe terminals but no washdown tolerance; keep it inside a cabinet.

Ratings that matter for the buyer

AC-4 covers plugging and inching (higher electrical wear), and AC-1 covers resistive loads. The 100 V DC coil is less common than 24 VDC or 110 VAC; verify your control supply matches before committing the BOM line.

Mechanical and environmental robustness

Rated to withstand 15 Gn shocks on Z axis (contactor closed) and 10 Gn (opened), per IEC 60068-2-27. Vibration resistance is 4 Gn closed, 2 Gn opened across 5-300 Hz. Flame retardance meets V1 per UL 94 and NF F 16-101/102. Protective treatment conforms to IEC 60068 and DIN 50016 for damp-heat and corrosive environments.

Frequently asked questions

What are the key ratings for this reversing contactor?

The LP2K1210KD is rated 12 A in AC-3 duty at <= 440 V, with a 100 V DC coil. It has 3 normally-open power poles and 1 normally-open auxiliary contact. The utilisation categories cover AC-3 (motor starting), AC-4 (plugging/inching), and AC-1 (resistive loads).

What is the closest alternative to the LP2K1210KD in the TeSys K family?

Within the TeSys K range, the closest functional alternative would be a reversing contactor with the same 3-pole, 12 A AC-3 rating but a different coil voltage — for example, the LP2K1210BW (24 VAC coil) or LP2K1210BD (24 VDC coil). The pinout and mounting footprint are identical; only the coil voltage changes. Verify your control circuit voltage before substituting.

What compliance documentation is available for the LP2K1210KD?

The contactor carries IP20 finger-safe protection per VDE 0106, flame retardance V1 per UL 94, and protective treatment conforming to IEC 60068 and DIN 50016. It is rated for operation up to 2000 m altitude without derating. Standard Schneider Electric declarations (RoHS, REACH, CE) apply to the TeSys K series.

MPN
LP2K1210KD