Schneider Electric NTSART0404XH
MPNNTSART0404XH
Active
Temperature Input Module, 4 Differential In, RTD, ThC, mV, 2/3/4 wires, Hardened, Modicon Edge I/O NTS
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Type of cable | Shielded cable |
| Range of product | Modicon Edge I/O NTS |
| Power supply type | Bus power from power supply bus (24 Vdc) Field power from power supply field (24 Vdc) |
| Analogue input type | Voltage +/- 40 mV Voltage +/- 80 mV Voltage +/- 160 mV Voltage +/- 320 mV Voltage +/- 640 mV Voltage +/- 1.28 V RTD Ni 100/Ni 1000 RTD Pt 100/Pt 1000 RTD Cu 10/50/100 RTD JPt 100/1000 RTD high precision Cu50/100, Ni100/1000, Pt100/1000 Resistor 150/300/600/2000/4500 Ohm Thermocouple type J/K/R/S/B/T/N/E/C/L/U |
| Input protection type | Over voltage protection |
| Product or component type | Temperature input module |
| Rated operational voltage limits | 20.4...28.8 V |
| Isolation between field power and bus | 1500 V AC |
| IP degree of protection | IP20 |
| Mounting support | base |
| Maximum cable distance between devices | Shielded cable Shielded cable <656.2 ft (200 m) |
| Pollution degree | 2 |
All specifications
| Parameter | Value |
|---|---|
| Shock resistance | 15 g 11 ms with and without accessory) |
| Relative humidity | 5...95 % without condensation |
| Operating altitude | 0...6561.68 ft (0...2000 m) 2000...5000 m with derating |
| Vibration resistance | 1 g without accessory 2 g with accessory |
| Depth | 2.7 in (69 mm) |
| Width | 0.6 in (15 mm) |
| Height | 3.9 in (100 mm) |
| Housing colour | Grey |
| Product weight | 0.108 lb(US) (0.049 kg) |
| Standards | EN/IEC 61131-2 EN 61010-2-201 UL 61010-2-201 IACS E10 EN/IEC 61000-6-5 EN/IEC 61850-3 EN/IEC 60079-0 EN 50155 EN 50121-4 EN 50121-5 |
| Marking | CE UKCA CULus RCM |
| Category | US1PC3318214 |
| Directives | 2014/30/EU - electromagnetic compatibility 2014/34/EU - ATEX directive 2014/35/EU |
| Non-linearity | <= 0.01 % FS thermocouple/RTD input |
| Operating mode | Asynchronous |
| Input impedance | 1 MOhm typical |
| Input diagnostic | Underflow error per channel Overflow error per channel Broken wire error per channel Hardware error per channel Calibration error per channel CJC error per channel Internal field power supply error per channel |
| Local signalling | 1 LED green module operating (RUN) 1 LED per channel green channel diagnostic 1 LED red module error (ERR) |
| Input wiring mode | 2, 3 or 4 wires for RTD and resistance inputs 2-wire for thermocouple and voltage inputs |
| Measurement error | <= 0.10 % FS -20...60 °C (short time sampling) |
| Sampling duration | 60 ms at 50Hz rejection per channel 60 ms at 60Hz rejection per channel 40 ms channel switch time with short time sampling 140 ms channel switch time with long time sampling |
| Temperature drift | +/- 0.003 %/°C |
| Device application | Industrial application in severe environment |
| Mandatory accessory | NTSXBA0100H base NTSXTB18_0_H terminal block |
| Protective treatment | Conformal coating |
| Analogue input number | 4 |
| Common mode rejection | 100 dB |
| Hot swapping fallback | Yes |
| Analogue input resolution | 16 bits with overflow |
| Environmental characteristic | Gas resistant Salt spray resistant |
| Permitted overload on inputs | +/- 2.4 % over voltage range |
| Isolation between channels and bus | 1500 V AC |
| Ambient air temperature for storage | -40...185 °F (-40...85 °C) |
| Ambient air temperature for operation | -40...158 °F (-40...70 °C) |
| Isolation between channels and field pwr | 1000 V AC |
MPN
NTSART0404XH