Servo motor with integrated holding brake for vertical-axis loads
The SH31401P11F1200 is a three-phase servo motor from Schneider Electric's SH3 series, rated for 2.9 kW continuous power with an integrated holding brake that delivers 23 Nm of holding torque — enough to hold a vertical-axis load in position when the drive is off. The absolute single-turn SinCos Hiperface encoder provides position feedback at power-up without a homing cycle, which saves commissioning time on multi-axis machines where each axis must know its absolute position on every power cycle.
Speed and torque across supply voltages
Nominal speed ranges from 750 rpm on 115 V single-phase up to 3600 rpm on 480 V three-phase, with nominal torque varying from 8.4 Nm at 480 V three-phase to 10.95 Nm at 115 V single-phase — the torque curve shifts with the available supply, so the drive's input voltage determines the usable torque at rated speed. Peak stall torque reaches 27 Nm across the 115–480 V three-phase range, giving headroom for acceleration transients during rapid positioning moves.
IP65/IP67 sealing for washdown environments
The motor body carries IP65 protection per IEC 60034-5, and the shaft bushing is also IP65-rated, while the housing achieves IP67 — meaning the motor survives temporary submersion and direct washdown, making it suitable for food-and-beverage or wet machining lines where coolant spray is constant.
Active production — sourced per RFQ
Pricing and availability are confirmed at quote time against the BOM quantity; the motor ships from authorized industrial supply with full manufacturer traceability.