BOM / RFQ

Schneider Electric TPRSS080

MPNTPRSS080

Active

SIL motor starter, TeSys island, 80A at AC-1, 66A at AC-3, 37kW, 40hp, DOL type

$806.26 – $901.25Ref. price · indicative, final on quote

Add to RFQ

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TPRSS080 key specifications
Parameter	Value
Monitoring type	Time device ON Time device switch ON Number of faults Number of switching cycles Number of device power cycles Average current Iavg Average voltage Vavg Max current Imax Max voltage Vmax Active and reactive power with voltage module Active and reactive energy with voltage module True power factor with voltage module
Protection type	Thermal overload protection Motor overheat Overcurrent Undercurrent Jam Long start Stall Rapid cycle lockout Phase sequence Rapid restart lockout Phase loss Phase reversal Phase unbalance Ground current
Motor starter type	Direct on line
Product or component type	SIL motor starter
Coil voltage	24 V DC supplied by the bus coupler
Voltage	690 V IEC 60947-4-1 600 V UL 60947-4-1 600 V CSA C22.2 No 60947-4-1
[Ue] rated operational voltage	<= 690 V AC 47...63 Hz
[Uimp] rated impulse withstand voltage	6 kV IEC 60947-1
[Icw] rated short-time withstand current	900 A 104 °F (40 °C) - 1 s 520 A 104 °F (40 °C) - 10 s 260 A 104 °F (40 °C) - 1 min 110 A 104 °F (40 °C) - 10 min
Current consumption	80 mA contactor sealed 500 mA contactor closing
Breaking capacity	1000 A at 440 V conforming to IEC 60947
[Ie] rated operational current	66 A (at 80 A (at <122 °F (50 °C)) at <= 440 V AC-1

All specifications

TPRSS080 additional specifications
Parameter	Value
[Ith] conventional free air thermal current	80 A (at 122 °F (50 °C))
Motor power	18.5 kW at 230 V 50 Hz (AC-3) 37 kW at 380...415 V 50 Hz (AC-3) 37 kW at 440 V 50 Hz (AC-3) 37 kW at 500 V 50 Hz (AC-3) 37 kW at 690 V 50 Hz (AC-3)
Power dissipation in	21.4 W at Ie AC-3
Motor power HP (UL (CSA))	5 hp at 120 V AC 60 Hz for 1 phase motors 10 hp at 240 V AC 60 Hz for 1 phase motors 20 hp at 208 V AC 60 Hz for 3 phase motors 20 hp at 240 V AC 60 Hz for 3 phase motors 40 hp at 480 V AC 60 Hz for 3 phase motors 50 hp at 600 V AC 60 Hz for 3 phase motors
Power dissipation per pole	6.5 W AC-3 9.6 W AC-1
Poles description	3P 3 NO
Utilisation category	AC-1 AC-2 AC-3 AC-4 AC-3e
IP degree of protection	IP20
Mounting mode	Horizontal and vertical 35 mm symmetrical DIN rail)
Connections - terminals	EverLink BTR screw connectors 1 0.002...0.05 in² (1...35 mm²) AWG 16...AWG 2)rigid EverLink BTR screw connectors 2 0.002...0.04 in² (1...25 mm²) AWG 16...AWG 4)rigid EverLink BTR screw connectors 1 0.002...0.05 in² (1...35 mm²) AWG 16...AWG 2)flexible without cable end EverLink BTR screw connectors 2 0.002...0.04 in² (1...25 mm²) AWG 16...AWG 4)flexible without cable end EverLink BTR screw connectors 1 0.002...0.05 in² (1...35 mm²) AWG 16...AWG 2)flexible with cable end EverLink BTR screw connectors 2 0.002...0.04 in² (1...25 mm²) AWG 16...AWG 4)flexible with cable end
Pollution degree	2
Shock resistance	15 gn 11 ms) IEC 60068-2-27
Relative humidity	5...95 %
Operating altitude	0...6561.68 ft (0...2000 m) without derating
Vibration resistance	1.5 mm peak to peak 3...13 Hz) IEC 60068-2-6 1 gn 13...200 Hz) IEC 60068-2-6
Depth	4.9 in (125 mm)
Width	2.2 in (55 mm)
Height	6.6 in (167 mm)
Electrical durability	0.75 Mcycles 66 A AC-3 440 V 0.5 Mcycles 80 A AC-1 440 V
Mechanical durability	6 Mcycles
Standards	EN/IEC 60947-1 EN/IEC 60947-4-1 UL 60947-4-1 CSA C22.2 No 60947-4-1
Range	TeSys
Reset	Remotely or automatically
Category	US10I1222352
Operating time	< 80 ms closing < 80 ms opening
Fire resistance	1760 °F (960 °C) UL 94 1562 °F (850 °C) IEC 60695-2-1 1202 °F (650 °C) IEC 60695-2-12
Safety function	Safe stop: category 0 conforming to IEC 60204-1 when associated with a TPRSM module Safe stop: category 1 conforming to IEC 60204-1 when associated with a TPRSM module
Local signalling	1 LED (green/red) for DS (device status) 1 LED (green/red) for LS (load status)
Average impedance	1.5 mOhm - Ith 80 A 50 Hz
Device short name	TPRSS
Tightening torque	44.3 lbf.in (5 N.m) 0.002...0.04 in² (1...25 mm²) hexagonal 0.2 in (4 mm) 70.8 lbf.in (8 N.m) 0.04...0.05 in² (25...35 mm²) hexagonal 0.2 in (4 mm)
Function available	Upstream voltage presence detection Electrical line and load protection Power and energy monitoring when connected with TPRVM voltage module Safe stop function available when connected with a TPRSM module
Device presentation	Direct starter connected to an automation controller through a bus coupler Operational only when connected to a bus coupler
Overvoltage category	III
Protective treatment	TC
Maximum operating rate	3600 cyc/mn AC-3
SIL rating	SIL 2 conforming to IEC 61508 in single channel system architecture SILCL 2 conforming to IEC 62061 in single channel system architecture PL = d category 2 conforming to ISO 13849-1 in single channel system architecture
Thermal overload class	Class 5...30
Safety performance level	B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
Irms rated making capacity	1000 A at 440 V conforming to IEC 60947
Electromagnetic compatibility	Electrostatic discharge immunity test, level 3, 8 kV air, 6 kV contact, conforming to EN/IEC 61000-4-2 Radiated RF field immunity test, level 3, 10 V/m, conforming to EN/IEC 61000-4-3 Fast transient immunity test, level 4, 4 kV, conforming to EN/IEC 61000-4-4 Surge immunity test (differential mode), level 3, 2 kV, conforming to EN/IEC 61000-4-5 Surge immunity test (common mode), level 4, 4 kV, conforming to EN/IEC 61000-4-5 Conducted RF disturbance immunity test, 20 V, conforming to EN/IEC 61000-4-6
Ambient air temperature for storage	-13...158 °F (-25...70 °C)
Thermal protection adjustment range	4...80 A
Ambient air temperature for operation	14...122 °F (-10...50 °C) without derating 122...140 °F (50...60 °C) with current derating