Motor ratings that govern the axis design
The 1FL2306-2AC11-0SB0: Rated power is 1 kW at 400 V 3AC supply, with a rated speed of 2000 rpm and a rated torque of 4.78 Nm. The holding torque at standstill is 5 Nm, which sets the stall holding capability before the brake engages. Shaft height of 65 mm with a plain shaft (tolerance N) means the motor mounts to standard NEMA or IEC frame interfaces at that centre height — the coupling and mounting flange dimensions follow the 65 mm shaft-height convention common in this power class.
Environmental sealing and brake for the application envelope
Protection class IP65 with an oil seal means the motor body and shaft seal withstand washdown and coolant splash — suitable for machine-tool and food-grade environments where cutting fluid or cleaning spray is present. The holding brake holds the vertical axis at standstill under power loss; the brake release voltage and current must be factored into the drive wiring. The angular connector with AS21 bit encoder provides 21-bit single-turn absolute position feedback — enough resolution for most servo positioning loops without a separate external encoder cable. The connector orientation is fixed; the motor cable must route to match the connector position on the frame.
Lifecycle and sourcing — active, made to order
Export control classification is AL: N / ECCN: N, so no special export licensing is required for most destinations.