What 1FL2306-2AC01-0HB0 puts on the shaft
The 1FL2306-2AC01-0HB0 is a SIMOTICS S-1FL2 low-inertia servomotor in the 65mm shaft-height frame, sized for a 400V 3AC supply at Pn=1kW with a rated speed of Nn=2000rpm and a continuous torque envelope of M0=5Nm / Mn=4.78Nm — meaning it covers continuous-duty positioning and short-cycle indexing without oversizing the drive. It ships as a plain-shaft, no-holding-brake configuration with an AS17-bit absolute encoder and an angled connector exit, paired with an IP65 seal plus oil seal for installations where coolant mist or fine dust reach the motor face — the oil-seal addition is what differentiates IP65-with-oil-seal from a bare IP65 rating for gearbox-adjacent mounting.
Built to pair with SINAMICS S200
Siemens lists the 1FL2306-2AC01-0HB0 as part of the 1FL2 servomotor family matched to the SINAMICS S200 drive platform — meaning the encoder protocol, winding data, and connector pinout are pre-validated against that drive, so commissioning does not require a third-party motor database load to get closed-loop current control up. Shipping carton footprint for a single unit is 392 x 269 x 286mm, which matters when you are pre-staging cabinet build slots or kitting replacements into a service truck — the packaging dimensions are a reasonable proxy for the motor's physical envelope and mounting-plate spacing on the panel layout.
Production status and what it means for a BOM line
Product class is C — manufactured/produced to order, non-returnable — meaning the order code does not pull from a stocked finished-goods shelf; it enters the factory build queue, so lead time is set by the production slot at the time of RFQ, not by distributor shelf count.
Compliance paperwork buyers ask about
Export control markings are AL:N / ECCN:N, so the motor is not designated under U.S. export-administration controls and can ship to most destinations without a separate license review — relevant when the same machine is sold into both domestic and offshore end-customer sites.