Rated 250 A continuous with a 200 kA interrupting capacity at 400 V AC, it handles motor loads up to 132 kW at 400 V without breaking a sweat. The electronic short-circuit trip gives you precision coordination downstream, and the IP20 finger-safe front keeps the wireman safe during commissioning.
That rating means this MCCB safely interrupts faults up to 200 kA without cascading upstream — critical when you're feeding a line with transformer capacity behind it. The 132 kW motor rating at 400 V gives you a direct sizing anchor: if your motor plate says 132 kW at 400 V, this breaker is the right match for AC-3 starting duty.
Screw fixing to the mounting plate — no DIN rail on this frame size at 105 mm wide by 205 mm tall by 103.5 mm deep. The 0 mm clearance required at the back and sides means you can pack it tight against the gland plate or adjacent breakers without derating. Any mounting position works, so vertical bus bars or horizontal layouts are both fine.
Substance prohibitance date of 01/08/2008 aligns with RoHS compliance — the part meets the EU RoHS directive effective from that date. No ground fault or phase failure detection built in (those functions live in the upstream protection or the motor management system), so plan your protection scheme accordingly.