Siemens SENTRON 3VA1220-5EE32-0AA0, molded case circuit breaker, 3-pole, 200 A rated current, TM220 overcurrent release, interrupting capacity 187 kA at 240 V.
| Parameter | Value |
|---|---|
| Product designation | Molded case circuit breaker |
| Brand / range | SENTRON |
| Parameter | Value |
|---|---|
| Number of poles | 3 |
| Rated operational voltage Ue (AC) | 690 V |
| Rated insulation voltage Ui | 800 V |
| Current at 40 °C | 200 A |
| Current at 45 °C | 200 A |
| Current at 50 °C | 200 A |
| Current at 55 °C | 194 A |
| Current at 60 °C | 188 A |
| Current at 65 °C | 182 A |
| Current at 70 °C | 176 A |
| Switching capacity class | M |
| Breaking capacity at 240 V | 187 kA |
| Breaking capacity at 415 V | 121 kA |
| Breaking capacity at 440 V | 75.6 kA |
| Breaking capacity at 500 V | 30 kA |
| Breaking capacity at 690 V | 17 kA |
| Power loss, max. | 42 W |
| Parameter | Value |
|---|---|
| Overcurrent release (trip unit) type | TM220 |
| Overcurrent protection function | LI |
| Ground-fault monitoring | Without |
| Grounding protection function | No |
| Parameter | Value |
|---|---|
| Main circuit connection type | nut keeper kit on both ends |
| Main circuit connector arrangement | Front terminal |
| Protection class (IP), front | IP40 |
| Parameter | Value |
|---|---|
| Undervoltage release | No |
| Voltage trigger | No |
| Trip indicator | No |
| Communication function | No |
| Measurement function | No |
| Motor drive option | Yes |
| Auxiliary CO contacts | 0 |
| Parameter | Value |
|---|---|
| Operating temperature, max. | 70 °C |
| Operating temperature, min. | -25 °C |
| Storage temperature, max. | 80 °C |
| Storage temperature, min. | -40 °C |
| Parameter | Value |
|---|---|
| Mechanical service life (operating cycles), typ. | 20 000 |
| Height | 158 mm |
| Width | 105 mm |
| Depth | 70 mm |
| Height (in) | 6.22 in |
| Width (in) | 4.13 in |
| Depth (in) | 2.76 in |
That 200 A holds flat through 50 °C — only above 55 °C does it start to derate, dropping to 176 A at 70 °C. The interrupting capacity is the headline: 187 kA at 240 V, 121 kA at 415 V, 75.6 kA at 440 V, 30 kA at 500 V, and 17 kA at 690 V. Those numbers cover high-fault utility feeds and large motor branch circuits where a standard MCB would weld shut.
Footprint is 105 mm wide by 158 mm tall by 70 mm deep — standard 3-pole MCCB envelope for a 200 A frame.
Submit an RFQ through the storefront. Availability and current pricing are confirmed at quote time through independent distribution channels.
The 3VA1112-5EE32-0AA0 is a lower-current sibling in the same SENTRON 3VA family. It shares the same 3-pole frame and TM220 release type but is rated for a lower continuous current. Verify the amp rating on your BOM before substituting — the 3VA1220-5EE32-0AA0 carries 200 A at 40 °C, while the 3VA1112-5EE32-0AA0 is a smaller frame size. Panel cutout and busbar spacing are the same, so it drops in mechanically, but the thermal rating must match the load.
Yes, mechanically it fits the same footprint — same 3-pole width, same depth, same busbar spacing. But the 3VA1220-5EE32-0AA0 is rated for 200 A continuous, so verify the busbar and cable sizing can handle that current if the original panel was built for a lower-rated breaker.
Siemens SENTRON MCCBs carry UL and IEC certifications as standard for the 3VA series. RoHS and REACH declarations are available from Siemens documentation. The rated insulation voltage is 800 V, and the interrupting capacities are listed per IEC 60947-2. Specific compliance certificates should be confirmed at quote time for the exact production batch.
No related articles