Ident & Fit
The 5SJ4318-7HG41: This is a current-production part. No last-time-buy or phase-out notice applies — specify it into your BOM with confidence.
DIN Rail & Panel Integration
Occupies 3 modular width units on a standard 35 mm mounting rail. Overall dimensions: 54 mm wide × 110 mm high × 70 mm deep. Any mounting position works; installation depth matches the overall depth. Combined terminals top and bottom ease wiring in tight cabinets. Terminal tightening torque specified at 3.5 N·m for copper conductors at 60/75 °C. Vibration resistance of 50 m/s² at 25–150 Hz covers standard industrial environments.
Environmental & Compliance
Rated for ambient temperatures from –40 °C to +75 °C, with humidity up to 95 % during operation. IP20 with connected conductors, IP40 in the handle area — no sealed enclosure needed for basic dust protection. Sealable design (lockable handle) supports tamper-proof installations. Halogen-free and silicon-free construction; pollution degree 3 and overvoltage category III. Suitable for environment B (immunity to interference not applicable).
Sourcing & Lifecycle
Same part, different passport — if you see this at a discount from another region, the internal construction is identical. Our cross-border sourcing verifies provenance to match your local compliance requirements.