Siemens SENTRON 5SJ4 series miniature circuit breaker, 3-pole, C-curve, 400 V AC, 10 kA (EN 60898) / 15 kA (IEC 60947-2), DIN-rail mount.
| Parameter | Value |
|---|---|
| Brand name | SENTRON |
| Number of poles | 3 |
| Pole configuration | 3P |
| Suitability for operation | Mechanical engineering / industry |
| Parameter | Value |
|---|---|
| Tripping characteristic (curve) | C |
| Breaking capacity per EN 60898 | 10 kA |
| Breaking capacity per IEC 60947-2 | 15 kA |
| Overvoltage category | 3 |
| IP protection class | IP20, with connected conductors, IP 40 in the handle range |
| Pollution degree | 3 |
| Parameter | Value |
|---|---|
| Supply frequency range | 50/60 Hz |
| Power loss per pole at rated current (AC, hot) | 2.9 W |
| Mechanical service life (operating cycles, typ.) | 10 000 |
| Neutral conductor switching | No |
| Parameter | Value |
|---|---|
| Modular width units | 3 |
| Mounting position | any |
| Width | 54 mm |
| Height | 110 mm |
| Depth | 70 mm |
| Installation depth | 70 mm |
| Terminal tightening torque, max. | 75 °C |
| Terminal tightening torque, min. | -40 °C |
| Combined terminal, top | Yes |
| Combined terminal, bottom | Yes |
| Fastening method | on standard mounting rail |
| Sealable | Yes |
| Accepts supplementary devices | Yes |
| Parameter | Value |
|---|---|
| Halogen-free | Yes |
| Silicone-free | Yes |
| Vibration resistance (IEC 60068-2-6) | ±1 mm at 5 to 25 Hz; 50 m/s² at 25 to 150 Hz |
Breaking capacity is 10 kA per EN 60898 and 15 kA per IEC 60947-2 at 400 V AC — the higher figure applies when the breaker is used in industrial applications where the standard allows the full IEC rating. That 15 kA ceiling gives headroom for high-fault panels without cascading upstream.
Rated voltage is 400 V AC; DC rated voltage is 60 V.
This part is sourced to order against an RFQ through independent distribution. Submit a request for quote to confirm current pricing and availability — no stock-holding claim is made here.
Breaking capacity is 10 kA per EN 60898 and 15 kA per IEC 60947-2 at 400 V AC. The higher 15 kA rating applies when the breaker is used under the industrial standard.
No related articles