Skip to main content
Siemens 5SV3616-6KL — Residual Current Breakers (RCCB/RCBO)

Siemens 5SV3616-6KL SENTRON RCCB, 63 A, 300 mA, Type A, 2-po

MPN5SV3616-6KL
Active

Siemens SENTRON 5SV3616-6KL, RCCB, 63 A, 300 mA, Type A, 2-pole, instantaneous, DIN rail, 10 kA SCCR.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

5SV3616-6KL — Electrical Ratings
ParameterValue
Number of poles2
Overvoltage categoryIII
5SV3616-6KL — Identification
ParameterValue
Product designationRCCB
Product design / constructionInstantaneous
5SV3616-6KL — Mechanical
ParameterValue
Mounting positionany
Width in modular units2
Maximum45 °C
Minimum-25 °C
Width36 mm
Height90 mm
Depth70 mm
Installation depth70 mm
5SV3616-6KL — Environmental
ParameterValue
IP degree of protectionIP20, if the distribution board is installed, with connected conductors

Product details

The Siemens 5SV3616-6KL is a 2-pole RCCB from the SENTRON series, rated 63 A at 50 Hz with a 300 mA residual trip threshold.

The 63 A rating holds continuously from 40 °C through 55 °C without derating; at 65 °C it drops to 56.96 A, and at 70 °C to 48.2 A. That thermal curve matters if this RCCB lives in a crowded enclosure or near a heat source — at 65 °C ambient you lose roughly 10 % of the headroom. The short-circuit current rating is 10 kA per IEC 61008-1, but the Icn according to EN 60898 is 0.8 kA. That split is common for RCCBs — the 10 kA figure is the conditional short-circuit rating with an upstream backup fuse or MCB; the 0.8 kA Icn is the rated breaking capacity without backup. In practice, coordinate this RCCB with a 10 kA MCB upstream to realize the full SCCR. The permissible I²t is 110 000 A²s, and the let-through current is rated at 7 100 kA — that last figure looks like a data artifact (likely 7.1 kA peak let-through), so treat it as the peak let-through under test conditions.

Mounting position is any. Depth is 70 mm.

MPN
5SV3616-6KL