The 3G3MX2-AB004-EV2 is an Omron MX2-series frequency inverter rated for 400 W output on a three-phase motor, supplied from a single-phase 200…240 V line. It delivers 3 A continuous and includes MODBUS RTU over RS485 plus a USB port for commissioning. A relay digital output and a 0…10 V analog output are on the screw terminals – no extra card needed. The carrier frequency is adjustable from 2 kHz to 15 kHz, so you can trade audible noise for motor heating depending on the cable run length. IP20 means it lives inside a panel – wall-mount with the supplied bracket. Operating range is -10 °C to +50 °C, good most conditioned or unheated plant rooms.
Footprint is 128 mm high × 68 mm wide × 109 mm deep – small enough for a shallow control panel. Keep the shield clamp tight for the RS485 link. The control inputs are 24 VDC digital (sink/source selectable) and one analog input configurable for 0…10 V or 4…20 mA. For simple speed pots, use the 0…10 V input with a 10 kΩ pot. The relay output is rated 3 A resistive – fine for a run signal or brake relay.
