Skip to main content
Omron H3CR-H8RL DC48 M

Omron H3CR-H8RL DC48 M Time Delay Relay, Off-Delay, 48 VDC,

MPN H3CR-H8RL DC48 M
Active

Omron H3CR-H series, off-delay time relay, 48 VDC, SPDT 5A @ 250VAC, 0.05-12 min range, octal plug-in.

$150.36 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

H3CR-H8RL DC48 M specifications
ParameterValue
SeriesH3CR-H
TypeMechanical Relay
Supply voltage48 VDC
MountingSocket
PackageBulk
Delay time0.05 Min to 12 Min
Timing initiate methodInput Voltage
Timing adjustment methodHand Dial

Product details

The Omron H3CR-H8RL DC48 M is an off-delay time relay from the H3CR-H series, socketable with an octal 8-pin base. It runs on 48 VDC and switches a single SPDT contact rated 5 A at 250 VAC. The delay is set by a hand dial covering 0.05 to 12 minutes, initiated by applying input voltage — once power drops, the timing cycle starts and the relay changes state after the set delay.

The 5 A @ 250 VAC SPDT contact handles pilot duty, small contactors, and signal-level loads — not motor starting. The 48 VDC coil is common in control panels with a 48 VDC bus, often found in telecom or industrial DC-powered systems. The octal plug-in base (8-pin) matches standard relay sockets, so swapping a failed unit takes seconds without rewiring. The off-delay function means the relay stays energized as long as power is present; when power is removed, the timing cycle begins and the output changes state after the dialed-in delay. That's useful for sequenced shutdowns, fan run-on after a motor stops, or staging downstream equipment off after a master stop.

MPN
H3CR-H8RL DC48 M