What lands on the BOM line
The ABB ACS880-01-05A6-3+E200+P904 is a member of the ACS880-01 low-voltage drive family, configured from the factory with the +E200 and +P904 option codes that ride on the base order string as suffixes rather than separate SKUs. It is a wall-mount / cabinet-mount motor drive in the small-frame end of the ACS880-01 lineup, listed at 3.70 kgs — light enough for a single installer to handle on the panel bench. The +E200 and +P904 suffixes are ABB's plus-code option convention, each one typically denoting a specific hardware or firmware feature set layered onto the base drive. For a procurement buyer that means the part number as quoted already carries the intended configuration, and a sub on the line has to match the same suffix string — a bare ACS880-01-05A6-3 without the plus codes is a different BOM line, not the same drive.
Integration note
At 3.70 kgs the drive mounts cleanly on a standard cabinet backplate inside the small-frame ACS880-01 footprint; the weight figure is the figure to carry into a panel-builder's handling note rather than a thermal or derating input. For a field replacement the dimensional envelope, gland plate cut-out and PE grounding bar of the existing ACS880-01-05A6 frame carry over — the +E200 and +P904 options are internal additions that do not alter the outer mounting geometry.