What ships under this order code
The ABB ACS880-01-096A-5+D150+E200+E208+L502+N5050+N8015+R700 is the ACS880-01 wall-mount drive, base frame on the 5-series with plus-codes D150, E200, E208, L502, N5050, N8015 and R700 fitted at the factory. At 20.41 kgs, the unit sits in the lifting-required bracket of the ACS880-01 family and wants a planned two-person mount into a wall cabinet rather than a backplane snap-fit; fastener selection on the cabinet back-plate should be sized for that mass before commissioning day. The SKU is filed as a Motor Drive under Drives in the Motors & Motor Controls category tree, placing it in the AC low-voltage inverter class and not a DC converter or soft-starter — important when a cross-border trader or MRO planner is matching a part number against an existing bill of material.
Sourcing posture for a configured ACS880-01
ABB is the listed brand; with no official successor code on record, there is no provable L*-level replacement, and any second-source move should be treated as a parametric decision inside the ACS880-01 frame rather than a like-for-like cross.
Same-frame siblings worth weighing
ACS880-01-040A-5 at 18.14 kgs and ACS880-01-065A-5 at 23.13 kgs sit in the same ACS880-01 wall-mount frame, bracketing the 20.41 kgs unit when the current rating is re-sized up or down. The DCS880-S02-0450-05X0 peer in the record is a DC-drive family, not a same-function alternative to an AC ACS880-01 unit, so it should not be carried into a BOM swap discussion for this code even though it shows up in the same Motor Drives category.
What to send with the RFQ
A clean RFQ for the ABB ACS880-01-096A-5+D150+E200+E208+L502+N5050+N8015+R700 should carry the full plus-code string, the 20.41 kgs handling figure for the cabinet-mount plan, and the intended Motor Drive application context — that bundle lets a sourcing desk confirm frame, option stack and lead posture in a single pass instead of back-and-forth on what the +codes actually change on the unit.