The ABB ACS880-M04-044A-5+E200+J400 is a configured ACS880-series drive in the multi-drive (M04) frame, carrying the +E200 and +J400 option suffixes in its order code. It sits in the Motor Drives line at 15.80 kgs as listed.
At 15.80 kgs the module is a two-person lift or a hoist job when seated into a cabinet — plan the rigging before the panel is on the floor, not after. Once bolted to the cabinet plinth, the standard ACS880 control-panel port and fibre-link chain carry over from the rest of the ACS880 family, so the commissioning engineer's parameter archive loads with the usual drive profile rather than a one-off script. The +E200 and +J400 option codes are stamped into the order string and on the nameplate; any replacement RFQ should reproduce both suffixes verbatim, since omitting either changes the configured ship-kit (firmware load, option-slot population, or terminal card) ABB ships against that code.
The order string resolves to the ABB ACS880 family, and the drive is specified into the BOM and quoted to order against an RFQ rather than pulled from a shelf. There is no separate successor part flagged in the record, so an equivalent configuration stays inside the ACS880 platform rather than crossing to a different series.