Skip to main content
Mitsubishi Electric RD77MS16

Mitsubishi RD77MS16 iQ-R Motion Controller, 16-Axis, SSCNET?

MPN RD77MS16

Mitsubishi iQ-R Series Motion Controller, RD77MS16, SSCNET?/H-compatible, 16 controlled axes, 600 positioning data points per axis, 2-axis circular / 4-axis linear interpolation, single control unit: pulse/mm/inch/degree.

$1,622.06 – $2,657.00 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Product details

The Mitsubishi RD77MS16 is an iQ-R Series Motion Controller built for multi-axis servo systems. It communicates over SSCNET?/H, the high-speed motion network, which means it talks to servo drives on a dedicated fiber-optic loop — no shared-bus collisions, deterministic timing down to the sub-millisecond range. That SSCNET?/H compatibility is the first thing to check against your existing drive lineup; if your amps are SSCNET?/H-native, this controller drops right in. It handles 16 controlled axes independently or in coordinated moves, with 600 positioning data points stored per axis. That data set covers point-to-point moves, speed changes, and dwells — enough for a multi-station assembly cell or a gantry with several tool heads. The interpolation function supports 2-axis circular arcs and linear moves across 2, 3, or 4 axes, so contouring a path (say, a pick-and-place head tracing a rounded corner) is handled onboard without the PLC breaking it into segments. The single control unit accepts positioning in pulses, millimeters, inches, or degrees — you pick the unit that matches your machine's native coordinate system and the parameter set adapts. No scaling math in the PLC scan.

The RD77MS16 mounts in the iQ-R backplane alongside the power supply, CPU, and I/O modules. It occupies one slot in the base rack or extension rack — no separate power feed needed beyond the backplane bus. The SSCNET?/H fiber cables run from the module's optical connectors to each servo drive; keep the fiber bends above the minimum radius specified in the manual to avoid signal loss.

MPN
RD77MS16