Skip to main content
Omron E5EC-CX4A5M-004

Omron E5EC-CX4A5M-004 Temperature Controller, 100-240VAC

MPN E5EC-CX4A5M-004
Active

Omron E5EC series process/temperature controller, 100-240VAC, analog + 4 relay outputs, RS-485 CompoWay/F & Modbus, IP66 front panel, active production.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

E5EC-CX4A5M-004 specifications
ParameterValue
SeriesE5EC
Output signalAnalog, Relay (4)
Supply voltage100 to 240VAC
IP ratingIP66
ProtocolRS-485 (CompoWay/F, Modbus)
MountingPanel Mount
Temp operating max55 °C
Temp operating min-10 °C
Weight0.463 lb (210.01 g)
PackageBox
Control methodOn/Off, Proportional (PID)

Product details

The Omron E5EC-CX4A5M-004 is a 1/4 DIN panel-mount process and temperature controller that accepts RTD and thermocouple inputs (types B, E, J, K, L, N, PLII, R, S, T, U, W) plus 0-20mA or 0-10VDC linear signals, covering a span from -200°C to 2300°C. It drives loads through one analog output and four relay outputs, so you can send a retransmission signal to a recorder or PLC while switching heaters, alarms, or valves directly. The IP66-rated front panel holds up in washdown environments — food, beverage, or chemical lines where hose-down cleaning is routine.

Communications and control

RS-485 on screw terminals speaks both CompoWay/F and Modbus RTU, so it drops into existing Omron networks or any Modbus master without a gateway. Control method is On/Off or full PID with auto-tune — set it for a simple limit switch or dial in tight temperature regulation on an oven or extruder barrel. The tri-color LCD backlight shows four characters per row across three rows; the largest digits are 18mm high, readable from across a machine cell.

Panel fit and supply

Cutout is 92mm x 45mm rectangular — standard 1/4 DIN footprint, no adapter plate needed for existing panel holes.

MPN
E5EC-CX4A5M-004