Skip to main content
Omron F3SJ-A0960P25

Omron F3SJ-A0960P25 Safety Light Curtain, 25mm Detection, 96

MPN F3SJ-A0960P25
End of Life

Omron F3SJ-A series safety light curtain, F3SJ-A0960P25, 25 mm detection capability, 960 mm protective height, 48 beams, 24 VDC, IP65.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

F3SJ-A0960P25 specifications
ParameterValue
SeriesF3SJ-A
Supply voltage24 VDC
IP ratingIP65
Temp operating max55 °C
Temp operating min-10 °C
PackageBulk

Product details

The F3SJ-A0960P25 is a 25 mm detection-capability light curtain from Omron's F3SJ-A series, rated for hand protection per IEC 61496. That 25 mm beam pitch means it catches a hand or finger reaching into the hazard zone — it does not detect a single digit, but it will stop a machine before a full hand enters the danger area. The 48 beams span a 960 mm protective height, so the guarded zone covers roughly a meter of vertical access. Operating range runs from 0.2 m to 9.0 m, which covers most machine-guarding distances on a production line — close up for a small press or out to 9 m for a wider conveyor entry. The 24 VDC supply is standard for safety circuits; no separate power supply module needed if your safety controller already provides 24 V. That suits washdown environments in food processing or packaging lines, but it is not rated for high-pressure spray or immersion — IP67 would be needed for hose-down at close range.

If you need a direct replacement, the closest parametric match is another F3SJ-A series curtain with the same 25 mm detection and 960 mm height — but verify the connector and mounting bracket compatibility against your current installation before committing the BOM line.

Integration notes for panel builders

The F3SJ-A0960P25 supports blanking and muting functions — blanking lets you disable specific beams for fixed obstructions (like a part fixture passing through the curtain), while muting temporarily suspends the safety function during a material transfer cycle. These are configured via the controller, not the sensor heads themselves, so factor in a compatible F3SJ controller unit for your safety circuit. Mounting brackets and alignment tools are available separately; the 20 mm beam pitch requires careful alignment to avoid nuisance trips from vibration.

MPN
F3SJ-A0960P25