Skip to main content
Omron J7KN50230

J7KN50230 Contactor, 3-Pole 50A 230V Coil, 30HP

MPN J7KN50230

J7KN series contactor, 3-pole, 50 A AC-3, 30 HP / 22 kW, 230 V AC coil, screw terminals, DIN rail or screw mount.

$193.17 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

J7KN50230 specifications
ParameterValue
SeriesJ7KN
Poles3
MountingDIN Rail, Screw

Product details

Motor starting duty at 50 A — what the AC-3 rating delivers

The J7KN50230 is a 3-pole contactor rated for 50 A in AC-3 duty, which means it handles the inrush of a 30 HP motor at 400/480 V without welding the main contacts on each start. That 50 A figure is the continuous current the main contacts carry once the motor is running; the actual making current on a NEMA Design B motor can hit 300 A for the first few cycles, and the contactor's AC-3 rating guarantees it survives those peaks through the full electrical life. The 22 kW switching power aligns with the 30 HP rating — a common size for pumps, fans, and light conveyors in European and North American panels. The 230 V AC coil pulls from the control transformer, so the panel designer needs to confirm the control circuit voltage matches before wiring the coil.

Panel fit: DIN rail or screw mount with screw terminals

Screw terminals on both the power and coil connections: torque to the manufacturer's spec (typically 2-3 Nm for the main circuit) for a gas-tight joint on stranded or solid copper wire up to 16 mm². The 3NO contact configuration means all three poles switch simultaneously — no auxiliary contacts built in. If the control scheme needs a feedback signal (e.g., a 'contactor on' status to the PLC), an add-on auxiliary contact block from the J7KN family clips onto the front without tools.

DC switching capability — limited but useful

Rated for 5 A at 220 V DC — this is a resistive load rating, not for DC motor starting. The DC arc extinguishes differently than AC (no zero-crossing), so the contact gap and arc chute limit DC current to about one-tenth the AC rating. Use it for DC brake coils, solenoid valves, or resistive heater contactors; for DC motor loads, derate further or use a dedicated DC contactor. The 690 V ceiling means the contactor can also serve 660 V mining or marine supplies where the line voltage sits above standard industrial 480 V.

MPN
J7KN50230