Skip to main content
Omron S8VK-G03024

Omron S8VK-G03024 Power Supply, 30W 24VDC 1.3A

MPN S8VK-G03024

Omron S8VK-G series, Standard model, Single-phase, 30 W, 24 VDC output at 1.3 A, DIN Rail mount, Screw Terminals.

$31.37 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

S8VK-G03024 key specifications
ParameterValue
SeriesS8VK-G
Output signalAdjustable
Product typePower Supply
Terminal typeScrew Terminal
Input voltage240 V
Insulation voltage ui3000 V
Current32 A
Output current1.3 A
Power30 W
Output power30 W
Frequency450 Hz
IP ratingIP20

All specifications

S8VK-G03024 additional specifications
ParameterValue
MountingDIN Rail
Temp operating max158 °F
Temp operating min-40 °F
Depth89.916 mm
Width32.004 mm
Height89.916 mm
Housing materialPlastic
Mtbf hours135000 h
Efficiency86%
I/O channels1
Ripple noise0.03 V

Product details

What this 30 W DIN-rail supply does for the panel

The Omron S8VK-G03024 is a 30 W single-phase power supply that delivers 24 VDC at 1.3 A from a 100–240 VAC input, mounted on a DIN rail with screw terminals. The adjustable output lets you trim the voltage a few percent to compensate for line drop in a long daisy chain to field devices.

Fit and integration on the DIN rail

The plastic housing measures 32 mm wide by 89.9 mm deep and high — it occupies a single DIN-rail module width, so it slips into a crowded panel without forcing a re-spacing of adjacent breakers or relays. IP20 rating means it belongs inside an enclosure, not on the wet side of the gland plate. Wire it with 24–12 AWG stranded; the screw terminals accept ferruled leads for a clean termination.

Protection and output characteristics

The supply includes automatic reset overload and overvoltage protection, plus parallel and series operation capability for scaling output current or voltage. Ripple and noise are held to 30 mV maximum, and output noise to 30 mV — clean enough for sensitive analog loads like 4-20 mA transmitters or strain-gauge amplifiers. Hold-up time is 23 msec at nominal load, 154 msec minimum — enough to ride through a half-cycle dip without dropping the DC bus.

MPN
S8VK-G03024