Skip to main content
Siemens 3RA6250-2CB34

Siemens 3RA6250-2CB34 SIRIUS Reversing Starter

MPN 3RA6250-2CB34
Active

Siemens SIRIUS compact reversing starter, 3RA6250-2CB34, 53 kA at 400 V, adjustable trip class 10/20, spring-loaded terminals, 191 x 90 x 165 mm.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RA6250-2CB34 specifications
ParameterValue
Mountingscrew and snap-on mounting
Depth165 mm
Width90 mm
Height191 mm
Trip classCLASS 10 and 20 adjustable

Product details

Reversing starter for motor direction control

The Siemens 3RA6250-2CB34 is a SIRIUS compact reversing starter — a single device that handles forward/reverse motor control without separate contactors and interlocks. It integrates the reversing contactor pair, overload relay, and short-circuit protection coordination into one 191 x 90 x 165 mm package that snaps onto standard DIN rail. Rated for continuous operation per IEC 60947-6-2, it delivers a 53 kA short-circuit current rating at 400 V — enough to coordinate with most upstream MCCBs or fuses in a distribution panel without cascading failure.

The overload relay is adjustable between CLASS 10 and CLASS 20 trip curves. CLASS 10 trips in under 10 seconds at 7.2× FLC — suited for motors that accelerate quickly (pumps, fans). CLASS 20 allows up to 20 seconds, covering high-inertia loads like conveyors or centrifuges where start time exceeds 10 seconds. The same device covers both, so you set the class during commissioning without swapping the relay. The control circuit is AC/DC 24 V, 50/60 Hz, drawing 2.8 W AC or 2.9 W DC maximum, which keeps the thermal load on the enclosure low. Three onboard LEDs indicate status — run, fault, and network communication — so a technician can read the starter's state without opening the panel door or connecting a laptop.

Panel environment and mounting

The enclosure is pollution degree 3 rated — suitable for industrial environments where conductive dust or condensation is present. Operating temperature range is -20 to +60 °C; storage and transport range is -55 to +80 °C. Vibration resistance is tested to 4–5.8 Hz at 15 mm amplitude, then 5.8–500 Hz at 20 m/s² for 10 cycles. Shock resistance is 60 m/s² (6g) for 10 ms, three shocks per axis. These ratings confirm the starter holds its settings and connections in a panel mounted on a machine frame or near rotating equipment.

MPN
3RA6250-2CB34