Skip to main content
Siemens 3RK1207-3CE00-2AA2

Siemens 3RK1207-3CE00-2AA2 AS-Interface Analog Input Module,

MPN 3RK1207-3CE00-2AA2
Active

Siemens Slimline SC22.5 AS-Interface I/O module, 3RK1207-3CE00-2AA2, 4 analog inputs, 16-bit A/D, Pt100/Ni100/resistance, IP20, screw terminals, 22.5 mm wide.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RK1207-3CE00-2AA2 specifications
ParameterValue
IP ratingIP20
Mountingscrew and snap-on mounting
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-25 °C
Depth120 mm
Width22.5 mm
Height100 mm

Product details

The Siemens 3RK1207-3CE00-2AA2 is a Slimline Compact I/O module for control-cabinet use, part of the AS-Interface SC22.5 family. It provides four analog inputs (16-bit A/D resolution) accepting Pt100 standard and climate range, Ni100, and 0...600 Ohm resistance measurements — no analog or digital outputs on this variant. The module is a standard AS-Interface slave with profile S-7.3.E, powered directly from the AS-Interface bus (18...31.6 V operating voltage per AS-Interface specification). An external auxiliary feed (AUX POWER) of 20...30 V DC, compliant with IEC 60990 (PELV, protection class III), is required to supply the output circuits — a critical detail for panel wiring. Input variable and smoothing are both parameterizable, giving the integrator flexibility to tailor the analog channel response per sensor type without hardware changes.

The module measures 22.5 mm wide by 100 mm high by 120 mm deep. Fastening is via screw and snap-on mounting. IP20 rated, it is intended for dry, clean control-cabinet environments — not for washdown or outdoor deployment. The screw terminals accept solid conductors 1x (0.5...2.5 mm²) or 2x (0.5...1.5 mm²), and finely stranded wire with ferrule 1x (0.25...2.5 mm²) or 2x (0.25...1.0 mm²). Stranded wire without ferrule is not permitted. Shock resistance is rated at 15g / 11 ms for the module alone, or 10g / 11 ms with the device connector attached — worth noting if the panel is on a moving machine axis.

MPN
3RK1207-3CE00-2AA2