Skip to main content
Siemens 3RK1301-0KB00-0AA2

Siemens 3RK1301-0KB00-0AA2 SIMATIC Motor Starter, CLASS 10,

MPN 3RK1301-0KB00-0AA2

Siemens SIMATIC motor starter, 3RK1301-0KB00-0AA2, direct starter design, CLASS 10 trip class, PROFINET and PROFIBUS DP, 50 kA rated at 400 V, pluggable on terminal module.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RK1301-0KB00-0AA2 specifications
ParameterValue
Mountingpluggable on terminal module
Depth120 mm
Width45 mm
Height265 mm
Trip classCLASS 10

Product details

The Siemens 3RK1301-0KB00-0AA2 is a SIMATIC-branded motor starter, specifically a direct starter design. It handles PROFINET and PROFIBUS DP fieldbus communication, so it slots into a networked control cabinet without a separate gateway.

The CLASS 10 trip class is the headline here: it coordinates with a standard motor's locked-rotor withstand curve, so you don't nuisance-trip on start-up but still get fast protection on a jam. The 50 kA at 400 V rated short-circuit current tells you this unit can be installed on a bus with high fault potential — common in industrial plants with large transformers. It's pluggable on a terminal module, which means the power and control wiring stays in the cabinet when you swap the starter; the fieldbus cables (PROFINET, PROFIBUS DP) also disconnect cleanly. Pollution degree 3 at 400 V means it's rated for conductive dust or light condensation — typical for an unsealed panel in a factory environment.

Mounts vertically or horizontally, which gives flexibility in a crowded cabinet. Fastening is pluggable on a terminal module — think of it as a base plate that carries the power bus and fieldbus backbone; the starter module clicks onto it. The 24 V DC control supply is the standard for modern PLC cabinets; the allowed range is 20.4 to 28.8 V, so it tolerates a weak battery or a long cable run.

MPN
3RK1301-0KB00-0AA2