Skip to main content
Siemens 3RK1325-6LS71-0AA5

Siemens 3RK1325-6LS71-0AA5 SIRIUS Motor Starter, 5.5 kW at 4

MPN 3RK1325-6LS71-0AA5
NRND

Siemens SIRIUS 3RK1325-6LS71-0AA5 direct motor starter, 5.5 kW at 400 V, IP65, AS-Interface, 4 digital inputs, trip classes 5/10/15/20, screw fixing, 159 x 294 x 215 mm.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RK1325-6LS71-0AA5 specifications
ParameterValue
IP ratingIP65
Mountingscrew fixing
Depth159 mm
Width294 mm
Height215 mm
Trip classCLASS 5, 10, 15, 20

Product details

The 3RK1325-6LS71-0AA5: The 5.5 kW at 400 V rating tells you this starter handles a standard 3-phase induction motor up to that load — think conveyors, pumps, or small fans. The 7.5 hp at 460/480 V covers North American 480 V supplies. Trip classes 5, 10, 15, and 20 are selectable, meaning you match the thermal overload curve to the motor's start profile: class 10 for short acceleration, class 20 for high-inertia loads like centrifuges. IP65 means the enclosure keeps out dust and low-pressure water jets — fine for food processing or outdoor installation, but not submersion. The AS-Interface protocol ties this directly into a 24 V DC sensor/actuator bus — no separate PROFIBUS or PROFINET gateway needed. The four digital inputs let you wire limit switches or pushbuttons locally without a remote I/O block. Supply voltage tolerance (20.4 to 28.8 V DC) means it rides through dips on a lightly loaded AS-I power supply, but the minimum permissible voltage is 26.5 V — keep the bus supply above that for reliable operation.

Mounting is via screw fixing — no DIN rail clip, so plan for four screws into a backplate. The enclosure can be oriented vertical, horizontal, or flat, but horizontal is recommended for best heat dissipation. The main circuit connects through a HAN Q4/2 plug — a standard industrial connector — so pre-wire the panel harness to that interface. Device addressing uses an M12 plug, typical for AS-Interface nodes. Shock rating of 12g / 11 ms and vibration resistance of 7 mm / 2g mean it holds up on a machine frame, not just a control cabinet.

MPN
3RK1325-6LS71-0AA5