Skip to main content
Siemens 3RK1902-2NC10

Siemens 3RK1902-2NC10 M12 Bus Cable, 10m, 4-Pole, Shielded

MPN 3RK1902-2NC10
Active

Siemens 3RK1902-2NC10 M12 plug angled to M12 plug angled bus cable, 10 m, 4-pole, shielded, 100 Ohm characteristic impedance.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RK1902-2NC10 specifications
ParameterValue
Connector typePlug / Plug
Poles4

Product details

M12 Angled-to-Angled Bus Cable, 10 m

The Siemens 3RK1902-2NC10 is a pre-assembled M12 bus cable with angled connectors on both ends, 10 m length, 4-pole, with a shielded PUR jacket. It is designed for PROFIBUS or similar RS-485 fieldbus networks in remote I/O and fieldbus module installations.

Connector and Cable Construction

Both ends terminate in M12 x 1 threaded plugs, angled type, with a molded strain relief. The shield is a tinned copper braid. The cable designation is BUS: 2x2xAWG22/7 9YH(ST)C11Y, with a characteristic impedance of 100 Ω at 100 MHz. The 4-pin layout carries a surge voltage resistance of 1.5 kV, and each pin is rated for a maximum ampacity of 4 A at up to 60 V AC or DC. The cable sheath is polyurethane (PUR), 6.7 mm outer diameter, with a polonium wire insulation and a conductor cross-section of 0.34 mm². It is rated for 2 million bending cycles.

Environmental and Compliance

Resistance to water, grease, and mineral oil is conditional and must be verified per the application.

MPN
3RK1902-2NC10